Diecasting · Speform ...for quality castingx
Navigationslinks überspringen > Diecasting

Die lubricants for aluminium diecasting, SPEFAT DG 3201

Characteristics: SPEFAT DG 3201 is a liquid, water-miscible die lubricant for aluminium diecasting. The active agent is wax-free and is made of thermally resistant polysiloxanes. Clean and homogeneous cast surfaces are achieved thanks to its good parting and lubricating properties.

Application: Dilution to 1:100 mix ratio possible
Area of use: fully and semi-automatic sprayers
Packaging: canisters, drums, containers


Die lubricants for aluminium magnesium and zinc diecasting,
SPEFAT DG 3202

Characteristics: SPEFAT DG 3202 is a liquid, water-miscible die lubricant for aluminium, magnesium and zinc diecasting. The active agent is wax-free and is made of thermally resistant polysiloxanes. Clean and homogeneous cast surfaces are achieved thanks to its good parting and lubricating properties.

Application: Dilution to 1:100 mix ratio possible
Area of use: Fully and semi-automatic sprayers
Packaging: canisters, drums, containers


Die lubricants for zinc diecasting, SPEFAT DG 3210

Characteristics: SPEFAT DG 3210 is a liquid water-miscible die lubricant for zinc diecasting. The active agent is made of resistant ester oils and is free from wax and silicone.

SPEFAT DG 3210 enables very good parting properties. Surfaces become very light-coloured, without turbulence.

Application: Dilution to 1:100 mix ratio possible
Area of use: Fully and semi-automatic sprayers
Packaging: canisters, drums, containers


Die lubricants for zinc diecasting, SPEFAT DG 3301

Characteristics: SPEFAT DG 3301 is a liquid, water-miscible die lubricant for zinc diecasting. The active agent is made of resistant ester oils and is free from wax and silicone.

SPEFAT DG 3301 enables very good parting properties. Surfaces become very light-coloured, without turbulence.

Application: Dilution to 1:100 mix ratio possible
Area of use: Fully and semi-automatic sprayers
Packaging: canisters, drums, containers


Casting ladle coating

SPECASTIN LS 613 is an isolating coating for casting ladles. It forms a protective layer between the tool and liquid aluminium.

SPECASTIN LS ladle coating should be used instead for high sodium modification.

Application:  brushing, spraying, immersing
Packaging: 5 kg, 10 kg, 20 kg tub

SPEFORM Metall-Chemie GmbH
Poertnerskamp 4-6
D-46286 Dorsten

Telefon: +49 - 2369 - 8054
Telefax: +49 - 2369 - 6640

www.speform.de
info@speform.de