SPECOTIN coatings for moulds and cores
: Some substantial differences exist with regard to impact on casting. Therefore, each SPECOTIN type is based on a main raw material, which has the best properties for the respective purpose; an optimum isolating effect is thus achieved between the mould, cores and metal. The main raw materials include: zirconium, graphite, coke dust, aluminium and magnesium silicates. In addition to the main raw materials, substances are used that give the coatings their particular property.
: Primarily for flow coating, immersing, spraying or brushing. Suitable for moulds and cores made of all mould materials.
: The coatings produce smooth, abrasion-resistant and crack-free coatings with very good adhesion on sand substrates of every kind. They can therefore be used on all moulding and core sands.
: Although the coatings settle very little, it is nonetheless advisable to stir them before use. After the coating has been applied the cores and moulds can be fired after approx. 1 minute. Casting can begin around 2 hours after firing.
: disposable hobbocks, lidded drums, returnable containers.
Water-based coatings particularly recommended for iron casting:
Alcohol-based coatings particularly recommended for iron casting:
SPECOTIN 314 N, Basis: Zirconium silicates
SPECOTIN 314 S, Basis: Zirconium silicates (low outgassing)
SPECOTIN 319 VF 1 (lost foam process), Basis: selected aluminium silicates
SPECOTIN 319 PT 3, Basis: Aluminium silicates with oxide
SPECOTIN 319 PT 1, Basis: Aluminium silicates with oxide
SPECOTIN 354 N, Basis: Zirconium silicates
SPECOTIN 354 D, Basis: Zirconium silicates (low outgassing)
SPECOTIN 354 F, Basis: Zirconium silicates (penetration coatings)
SPECOTIN 354 H4, Basis: Zirconium silicates (low outgassing, brush-on coatings)
SPECOTIN 35520, Basis: selected silicates, oxide fraction, graphite
SPECOTIN 3594, Basis: Zirconium silicates, aluminium silicates and oxide fraction
PECOTIN 3534, Basis: zirconium & magnesium silicates, against graphite degeneration
A large number of other coatings are available on request.
: SPECOTIN thinner contains isopropyl alcohol
: Thinner for all alcohol-based coatings
SPECOTIN mould and core varnish
: Special varnish for surface hardening