Cold-setting resins and hardeners · Speform ...for quality castingx
Navigationslinks überspringen > Heavy metal casting > Cold-setting resins and hardeners

SPEFUR furan resins for core and moulding sands

Characteristics: SPEFUR furan resins are acid-curable synthetic resin products for binding core and moulding sand at room temperature. The base material for all SPEFUR furan resins is pure furfuryl alcohol. The SPEFUR furan resin product range includes numerous qualities, which cover all types of casting and applications.

Properties: The cores and moulds made with SPEFUR furan resins are particularly characterised by their extremely good dimensional stability and very high strength. The special composition of these resins (high furfuryl alcohol content while at the same time having minimum free formaldehyde, nitrogen and water content) results in environmentally friendly use. All types in the SPECATIL hardener product range are particularly suitable as hardeners.

Application: The products are usually used in continuous mixers. If used in batch mixers, place sand in first, add SPECATIL hardener and mix for 2 minutes. Then add SPEFUR resin and mix for a further 2 minutes.

Shelf-life: At least 6 months, if stored appropriately in closed containers.

Furan resins particularly recommended for heavy metal casting:
  • SPEFUR A 580, furfuryl alcohol content: high, low odour
  • SPEFUR  80 SP, furfuryl alcohol content: high, low odour 
  • SPEFUR 77 SP-VO-R, furfuryl alcohol content: high, low odour
  • SPEFUR FH 1205, furfuryl alcohol content: high, low odour
  • SPEFUR FH 1205-V, furfuryl alcohol content: high, low odour
Other furan resins are available on request.

SPELUX phenol resins

Characteristics: SPELUX is a condensation resin made of phenol and formaldehyde. The sand mixture is cured at room temperature by adding a hardener from the
SPECATIL TS and SH series.

High mould and core dimensional accuracy and strengths are achieved.

SPELUX can be used with quartz, zirconium and chromite sands. The quantity added is generally between 0.9 % and 1.3 % of the sand quantity.

SPELUX can be stored for approx. 2 months in cool storage conditions (15-20° C).

Phenol resins particularly recommended for heavy metal casting:
  • SPELUX 05



SPEFUR  furan phenol blend resins

Furan phenol mixed resins particularly recommended for heavy metal casting:
  • SPELUX F 420, N = 0.5 %
  • SPEFUR P 37, N < 0,5 %
  • SPEFUR P 50, N < 0,6 %
  • SPEFUR P 80, N < 0,2 %
  • SPEFUR FH 745, N < 0,4 %
Other furan phenol blend resins available on request.

Packaging: canisters, drums, containers, tanker vehicles




SPECATIL hardeners

Characteristics: SPECATIL hardeners are used for cold-setting furan and phenol resins. Depending on the type, the curing rate of the mould material mixture can be controlled to enable easy working not only during the cold season but also in increased or very high temperatures.

SPECATIL hardeners can be stored for 6 months at room temperature.

Hardeners particularly recommended for heavy metal casting:
  • SPECATIL TS 104 (standard hardener)
  • SPECATIL SH 35 (rapid hardener)
  • SPECATIL SH 70 (rapid hardener)
  • SPECATIL SR 1400 (reduced sulphur standard hardener)
  • SPECATIL SR 50-3A (reduced sulphur rapid hardener)
Other hardeners are available on request.

SPEFORM Metall-Chemie GmbH
Poertnerskamp 4-6
D-46286 Dorsten

Telefon: +49 - 2369 - 8054
Telefax: +49 - 2369 - 6640

www.speform.de
info@speform.de